And if you’re searching for an easy way to flash the device’s stock ROM, just follow up the procedures.
You just need the QPST tool on your pc and follow up as i guide you.
Follow the instructions below to get you started.
Things needed:
A working Computer
Qualcomm drivers - Drivers download
Qualcomm QPST tool - QPST download
Qualcomm Firmware - Stock firmware
How to use the QPST tool.
To use the QPST tool, some drivers need to be installed on your computer. Follow the instructions below to install it.
1. Download and install the Qualcomm driver from the link above. For successful installation, while installing the driver, avoid using the USB cable.
2. After installation, connect the phone to the PC using a USB cable.
3. While connecting to PC, phone should be switched off and press volume up & down as boot key.
4. If it makes a Qualcomm port, then the driver has been successfully installed.
5. Open device manager and check if its well installed.
 |
| GB SOFTECH |
Now Flashing Qualcomm Smartphone using the QPST tool.
Once driver installation is complete and all steps done its time to prepare your phone for flashing follow the instructions below to flash firmware file to your Qualcomm device.
1. Make sure your device is charged to at least 40%.
2. Run QFIL tool that you installed on yor pc after download.
3. Click on Browse under the Programmer path to select MBN File in your stock firmware you downloaded.
It looks like this
5. Click on Load XML, select rawprogram_unsparse_without_qcn.xml and then choose Patch0.xml
Load XML comes with two option most cases first check carefully:
👉 Rawprogram_unsparse_without_qcn.xml : When choosing this file, data will not be lost.
👉Rawprogram_unsparse.xml : Will lose RF Calibration data, IMEI, and WiFi/Bluetooth Address.
6. Switch off the device and connect it to PC by pressing Volume up & down key if its doesnot connect somestimes u have to find your phone tests points （Edl mode）to connect.
7.Click on Select Port and choose the port after the phone connected successfully.
8. Click on Download to start flashing. 👌 Cool Happy Flashing.
9. Disconnect the device from the USB cable once “Finish Download” appears. That what is need only for qualcomm devices.
For any Inqueries and Help